RM3090E _59 Vehicle Exterior _008792 WINDOW / GLASS _0050247 POWER WINDOW CONTROL SYSTEM(w/o Jam Protection Function) U

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM(w/o Jam Protection Function)  TERMINALS OF ECU  


CHECK POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY


B318850
1.531,0.115 1.875,0.333 0.344,0.219 1.625,0.135 1.938,0.333 0.313,0.198 10 J5
J5

a.

Disconnect the J5 power window regulator master switch assembly connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
J5-1 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω
J5-6 (B) - J5-1 (E) L - W-B IG power supply Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V


c.

Reconnect the J5 power window regulator master switch assembly connector.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
J5-3 (U) - J5-1 (E) R - W-B Driver door power window motor UP output Ignition switch ON, driver door power window switch off 11 to 14 V
Ignition switch ON, driver door power window switch up (Manual operation) Below 1 V
J5-4 (D) - J5-1 (E) GR - W-B Driver door power window motor DOWN output Ignition switch ON, driver door power window switch off 11 to 14 V
Ignition switch ON, driver door power window switch down (Manual operation) Below 1 V
J5-16 (U) - J5-1 (E) G - W-B Front passenger power window motor UP output Ignition switch ON, front passenger door power window switch off Below 1 V
Ignition switch ON, front passenger door power window switch up (Manual operation) 11 to 14 V
J5-15 (D) - J5-1 (E) BR - W-B Front passenger power window motor DOWN output Ignition switch ON, front passenger door power window switch off Below 1 V
Ignition switch ON, front passenger door power window switch down (Manual operation) 11 to 14 V
J5-12 (U) - J5-1 (E) R - W-B Rear door LH power window motor UP output Ignition switch ON, rear door LH power window switch off Below 1 V
Ignition switch ON, rear door LH power window switch up (Manual operation) 11 to 14 V
J5-13 (D) - J5-1 (E) BE - W-B Rear door LH power window motor DOWN output Ignition switch ON, rear door LH power window switch off Below 1 V
Ignition switch ON, rear door LH power window switch down (Manual operation) 11 to 14 V
J5-10 (U) - J5-1 (E) G - W-B Rear door RH power window motor UP output Ignition switch ON, rear door RH power window switch off Below 1 V
Ignition switch ON, rear door RH power window switch up (Manual operation) 11 to 14 V
J5-18 (D) - J5-1 (E) BR - W-B Rear door RH power window motor DOWN output Ignition switch ON, rear RH door power window switch off Below 1 V
Ignition switch ON, rear RH door power window switch down (Manual operation) 11 to 14 V



CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY


C278789E03
2.656,5.323 2.958,5.563 0.302,0.24 0.552,5.271 0.854,5.51 0.302,0.24 1.896,6.99 2.198,7.229 0.302,0.24 5.583,5.302 5.885,5.542 0.302,0.24 5.417,7.01 5.719,7.25 0.302,0.24 2.344,1.146 2.656,1.344 0.313,0.198 10 3B 2.708,5.365 3.021,5.563 0.313,0.198 10 3B 3.656,1.052 3.969,1.25 0.313,0.198 10 3C 4.365,1.188 4.677,1.385 0.313,0.198 10 3D 2.26,2.979 2.573,3.177 0.313,0.198 10 3A 0.604,5.302 0.917,5.5 0.313,0.198 10 3A 1.969,7.031 2.281,7.229 0.313,0.198 10 3D 5.646,5.323 5.958,5.521 0.313,0.198 10 3C 3.052,1.063 3.365,1.26 0.313,0.198 10 3E 5.479,7.052 5.792,7.25 0.313,0.198 10 3E

C278790
1.333,3.667 1.75,3.896 0.417,0.229 2.531,5.563 2.948,5.792 0.417,0.229 3.333,7.438 3.75,7.667 0.417,0.229 1.365,7.458 1.781,7.688 0.417,0.229 1.25,5.25 1.417,5.25 1.417,5.25 1.667,4.833 false 1.083,7.25 1.333,7.25 1.333,7.25 1.583,7 false 2.667,1.656 2.823,1.854 0.156,0.198 10 A 1.5,3.698 1.656,3.896 0.156,0.198 10 A 0.313,4.281 0.563,4.458 0.25,0.177 10 *A 1.083,5.167 1.333,5.344 0.25,0.177 10 *1 2.615,5.594 3.052,5.76 0.438,0.167 10 G78 3.406,7.469 3.865,7.635 0.458,0.167 10 G78 1.427,7.49 1.781,7.667 0.354,0.177 10 G79 0.917,7.167 1.167,7.344 0.25,0.177 10 *1 0.281,6.646 0.531,6.823 0.25,0.177 10 *B
A
A
*A
*1
G78
G78
G79
*1
*B
*A Main Body ECU (Multiplex Network Body ECU) with 1 Connector *B Main Body ECU (Multiplex Network Body ECU) with 3 Connectors
*1 Main Body ECU (Multiplex Network Body ECU) - -


a.

Remove the main body ECU (multiplex network body ECU).

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU(for LHD)>REMOVAL


b.

Connect the instrument panel junction block assembly connectors.


c.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A-11 (GND1) - Body ground None - Body ground Ground Always Below 1 Ω
A-30 (BECU) - Body ground None - Body ground Battery power supply Always 11 to 14 V
A-29 (ACC) - Body ground None - Body ground ACC power supply Ignition switch ACC 11 to 14 V
Ignition switch off Below 1 V
A-32 (IG) - Body ground None - Body ground IG power supply Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V


d.

Install the main body ECU (multiplex network body ECU).

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU(for LHD)>INSTALLATION


e.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
3C-44 - Body ground R - Body ground Power window relay operation signal Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V